Maipu MP7500 Скачать руководство пользователя

Страница: 56 / 62

MP7500 Router Installation Manual Version 1.0

High-speed ATM Board Card (RM7B-
1ATM-OC3H, RM7B-2ATM-OC3H, RM7B-
4ATM-OC3H) Cable Connection

This section describes how to connect the high-speed ATM board card

(RM7B-1ATM-OC3H, RM7B-2ATM-OC3H, RM7B-4ATM-OC3H) cable.

Step 1: Insert the fiber connector to the jack of the high-speed ATM board
card (RM7B-1ATM-OC3H, RM7B-2ATM-OC3H, RM7B-4ATM-OC3H) optical
module.

Step 2: Connect the other side of the fiber to the corresponding device.

Note that the TX cable is connected to the RX end of the peer device and
the RX cable is connected to the TX end of the peer device.

During connection, pay attention to the interface ID and avoid inserting

into other interface.

If LINK light flashes, it means that the port is configured with local loop

and the loopback is checked.

If STATE light is off/on, it means that the high-speed ATM interface board
does not work normally.

2-port Gigabit Ethernet Interface Board
(RM7B-2GEH) Cable Connection

This section describes how to connect 2-port Gigabit Ethernet interface
board (RM7B-2GEH) cable.

Step 1: Insert the fiber connector to the jack of the 2-port Gigabit

Ethernet interface board (RM7B-2GEH) optical module.

Step 2: Connect the other side of the fiber to the corresponding device.
Note that the TX cable is connected to the RX end of the peer device and

the RX cable is connected to the TX end of the peer device.

During connection, pay attention to the interface ID and avoid inserting

into other interface. If STATE light is off/on, it means that the 2-port
Gigabit Ethernet interface board does not work normally.

Maipu Confidential & Proprietary Information

Page

Содержание MP7500































































Результаты поиска

Содержание MP7500

Отзывы:

Похожие инструкции для MP7500

Бренды по названию

Популярные бренды

Maipu MP7500, Руководство по установке

Результаты поиска

Содержание MP7500

Отзывы:

Похожие инструкции для MP7500

Бренды по названию

Популярные бренды