background image

MP7500 Router Installation Manual Version 1.0 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

All rights reserved. Printed in the People’s Republic of China.  
  
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any 
language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual 
or otherwise without the prior written consent of Maipu Communication Technology Co., Ltd. 
  
Maipu makes no representations or warranties with respect to this document contents and specifically disclaims any implied 

warranties of merchantability or fitness for any specific purpose. Further, Maipu reserves the right to revise this document 
and to make changes from time to time in its content without being obligated to notify any person of such revisions or 
changes. 
  
Maipu values and appreciates comments you may have concerning our products or this document. Please address comments 
to: 
  

Maipu Communication Technology Co., Ltd 

No. 16, Jiuxing Avenue 
Hi-tech Park 
Chengdu, Sichuan Province 
People’s Republic of China - 610041 

Tel:

 (86) 28-85148850, 85148041 

Fax:

 (86) 28-85148948, 85148139 

URL:

 http:// 

www.maipu.com

Email:

 

[email protected]

 
All other products or services mentioned herein may be registered trademarks, trademarks, or service marks of their 
respective manufacturers, companies, or organizations. 

 

Document History 

Date 

Revision No. 

Description 

31/01/2008 R1.0 

The MP7500 Router Installation Manual Version 1.0 provides all information 
about the procedures for installation of the router designed and developed by 
Maipu Communication Technology Co Ltd 

 

Maipu Confidential & Proprietary Information 

     Page 

of 

62 

 
 

Содержание MP7500































































Отзывы: