Power on and Run Router
MP1900X Series Router Installation Manual
4-6
copyright
2019 Maipu, all rights reserved
Figure 4-9 “
Test properties
” interface
Step 8:
Display the following
test-HyperTerminal
interface, press
Enter
at the blank place, and
the serial port displays the print information. The setting of the HyperTerminal is
complete.
Figure 4-10
test-Hyperterminal
interface after setting
4.1.3
Power on and Start
Check before Power on
Check the router before powering on:
The interface cables, power cables, and PEs are connected correctly.
Power supply voltage meets the power requirement of the device. For details, refer
