Router Installation
MP1900X Series Router Installation Manual
3-8
copyright
2019 Maipu, all rights reserved
Before installing the router to the cabinet, ensure that the corresponding positions
on the cabinet are installed with slide (tray) and the slide (tray) can support the
weight of router and its accessories.
The following describes the installation process of installing the router to the cabinet.
Step 1: Uplift the router from both sides and place it on the slide (tray) of the cabinet. Inset the
router to the cabinet smoothly until the hanging ear of the router is closely cling to the
square hole bar in the front of the cabinet. The slide (tray) bears the weight. The router is
installed to the 19-inch standard cabinet, as shown in the following figure.
Figure 3-3 Install the router to the 19-inch standard cabinet
If the screw hole on the hanging ear cannot align to the floating nut installed on the
cabinet correctly, check whether the bearing surface of the slide (tray) is on the
integer U boundary and whether the floating nut is installed on the correct hole
position.
Step 2: Use the M6 panel screws to fix the floating nuts on the chassis mounting ears and
cabinet post square hole bar, so as to prevent the router from sliding front and back.
