Power on and Run Router
MP1900X Series Router Installation Manual
4-4
copyright
2019 Maipu, all rights reserved
Figure 4-5 “Connection Description” interface
Step 4:
Display the following
Connect to
interface, select the serial interface used by the
connection in the
Connect using
, and click
OK
.
Figure 4-6 “Connect to” interface
Step 5:
Display the following
COM1 Properties
interface, set the baud rate as 9600, data bit as
8, parity check as none, stop bit as 1, and data flow control as none, and then click
OK
.
