MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 38 of 95
Gateway
: Set the next-hop IP address of the static route, that is, the port
address of the neighboring router.
Interface
: Specify the interface on which the static route functions.
Click
and you can delete the corresponding static route.
Caution
1.
After adding route information, you should click Save to make
the device valid; before saving, do not switch to other
interface.
2.
When the destination address is set as one IP, the subnet mask
should be set as 255.255.255.255. Otherwise, the system
calculates one network address automatically according to the
subnet mask.
3.
If you want to add route information, click Add to add the static
route.
4.
If selecting Black hole for interface, the one is the black hole
route and the packets matching the route are dropped directly.
5.
When the dial interface and Ethernet WAN interface are up, add
the default route automatically. Do not need to add in the static
route.
Dynamic Route
MP1800-10 router supports RIP dynamic route. Enter
Network
>
Dynamic Route
and you can perform the RIP dynamic route
configuration, as follows:
1.
Dynamic route
