MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 34 of 95
Others
Debug
: Set whether to output the details of the LCP and IPCP negotiation
during the PPP dialing. By default, it is disabled.
Use Peer DNS
: Whether to permit using the peer DNS. By default, it is
enabled.
Add Default Route
: If ticking, add the default route pointing to the dial
interface.
Use Default Asyncmap
: Whether to enable the default asyn control
character mapping (asyncmap). By default, it is disabled.
LCP Echo Interval
: Set the PPP LCP keepalive interval. The setting range
is 1-2147483647. By default, send one LCP every 10s.
LCP Echo Failure
: Set the PPP LCP keepalive times. The setting range is
1-2147483647. The default value is 6 times.
MTU
: Set the maximum packet transmitted on the PPP link. The unit is
byte and the maximum value is 1492.
MRU
: Set the maximum packet received on the PPP link. The unit is byte
and the maximum value is 1492.
Local IP
: Set the local IP requested to distribute when performing the PPP
IPCP negotiation during dialing.
Remote IP
: Set the peer IP specified when performing the PPP IPCP
negotiation during dialing.
Service Name
: Set the name of the service requested during the PPPoE dialing.
