MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 28 of 95
Other parameters
Other parameter setting provides you whether to permit using the peer
DNS, LCP echo interval, LCP echo failure, packet side processing, and
debug IP setting.
Other parameters
Asyn Control Character Map
: The asyn control character mapping is one 32-bit
set. Each bit indicates one ASCII value, 0-31 ASCII character. Each bit with the
value 1 indicates that the corresponding control character should not be in the
PPP packet sent by the peer. The mapping table uses the hexadecimal coding
(do not need 0x). The least significant bit (00000001) indicates the character 0
and the most significant bit (80000000) indicates the character 31.
Debug
: Set whether to output the details of LCP, IPCP negotiation during
PPP dialing. By default, it is disabled.
Use Peer DNS
: Whether to permit using peer DNS. By default, it is
enabled.
Check invalid DNS
: If ticking, detect whether the got DNS is valid. If
invalid, re-dial.
No Default Route
: If ticking, do not add the default route to the dialing
interface. Otherwise, after dialing succeeds, add the default route to the
dialing interface.
LCP Echo Interval
: PPP link control protocol (LCP) echo interval setting.
The value range is 1-2147483647.
