![background image](http://html2.mh-extra.com/html/maier/dp-series/dp-series_operating-instructions-manual_3677506027.webp)
Christian Maier GmbH & Co. KG
© 2020 by Christian Maier GmbH & Co. KG Maschinenfabrik | This document may not be copied or disclosed to third parties.
All rights, including copyright and property rights, reserved by Christian Maier GmbH & Co. KG.
Operating manual Series DP_en – Part-B-Version 10 – 19.03.2020
2/31
B
B-27
Avoid connection offset. Bear in mind that bending
causes linear deformation.
B-28
Allow for restricted degrees of freedom. Bear the
smallest permissible bending radius in mind.
B-29
B-30
Preferably use pipe bends with fixed elbows which
allow for two-way flow.
All degrees of freedom are possible without tension
if the length is sufficient.