Christian Maier GmbH & Co. KG
© 2020 by Christian Maier GmbH & Co. KG Maschinenfabrik | This document may not be copied or disclosed to third parties.
All rights, including copyright and property rights, reserved by Christian Maier GmbH & Co. KG.
Operating manual Series DP_en – Part-B-Version 10 – 19.03.2020
2/31
B
6
Mounting
6.1
Mounting the rotary joint to the roller DN 10 to 50
INFORMATION
Use only flat packings made of pure graphite with metal insert.
Use only flat packings made of
pure graphite with metal insert.
Preparation for mounting and separation of the inner pipe for two-way flow design (dual-
passage)
B-9
With stationary screwed-in inner pipe (DP2) with right-
hand thread:
Make sure the inner pipe is centered on the axis of ro-
tation.
B-10
With rotating inner pipe (DPR2):
Mount inner pipe into the elbow. Make sure that the
bearing surface of the inner pipe is centered and that
there is no tension.
