UK │ 13. Spare parts
34
Fault
Cause, measure
Lamella do
not open for
K units.
Check whether the wiring is
correctly carried out refer to
diagram 1 (high level), page
49. Bridge terminal 1 and 2.
13. Spare parts
Spare parts may only be sourced
from and fitted by a specialist
installer.
Item
Designation
Article no.
1.1
Standard circuit
board
E101.1410.0000
1.2
Standard K circuit
board
E101.1413.0000
1.3
VZC circuit board
and sensors
E101.1411.0001
1.4
RC circuit board
E101.1412.0000
5.1
Electronics cover
0059.1510.0000
5.2
Electronics cover,
perforated for
sensor variants
0059.1510.9000
6.2
Shutter frame,
assembled
E059.1503.9100
7
Cover, complete
0059.1502.9000
7.1
Cover, complete
for B variants
0059.1502.9100
7.2
Cover, complete
for H variants
0059.1502.9200
9.1
B module
0157.0145.0000
9.2
H module
0157.0146.0000
In case of questions
Maico Elektroapparate-Fabrik GmbH
Steinbeisstrasse 20
78056 Villingen-Schwenningen
Germany
Tel. +49 (0)7720 694 445
Fax +49 (0)7720 694 175
e-mail: [email protected]
14. Dismantling
Dismantling may only be undertaken
by a trained electrician (
Chapter 1).
DANGER
Danger to life from electric shock.
Prior to access to the connection
terminals switch off all supply circuits.
Switch off mains fuse, secure against
being accidentally switched back on and
position a visible warning sign.
DANGER
For K units only: Danger of burning
due to contact with thermo-bimetal
strip [6.3].
Do not touch bimetal strip [6.3]. Bimetal
strip is very hot after fan is switched off. It
may take up to 10 minutes to cool down.
1. Switch the mains fuse off.
2. Remove covers [7]/[8].
3. Remove the electronics cover [5].
4. Remove power cable.
5. Remove fan.
15. Disposal
Do not dispose of in domestic
waste.
The unit contains in part
materials that can be recycled and in
part substances that should not end
up in the domestic waste.
Dispose of the unit once it has reached the
end of its service life according to the
regulations valid where you are.
i
i
i
Содержание ECA 150 ipro
Страница 56: ...56...