MAHLE ArcticPRO ACX2120H, Руководство по эксплуатации

Страница: 26 / 40

© MAHLE
26 | ACX2120H | Maintenance en
10.15 Printer maintenance (optional)
1. Open the lid of the printer as shown in Fig. 37.
Fig. 37: Opening printer
Fig. 38: Installing new paper roll
Fig. 39: Completing installation
2. Position the roll of paper inside the housing in the rotation
direction indicated in Fig. 38.
3. Pull the paper out of the housing as shown in Fig. 39 and
close the lid.
4. The printer is ready for printing.
10.16 Periodic checks
t
The ACX2120H service station must be checked over regularly
as set by local legislation.
m
The following checks should be performed to ensure safe and
reliable operation:
—
Make sure no corrosion or leakage is present in the in -
ternal cylinder and other metallic parts of the equipment
(under normal conditions the internal cylinder life is at
least 20 years).
—
If automatic safety valve trips, contact technical support
to have unit inspected, resolve any issues and replace
valve if necessary.
—
If the safety pressure switch trips, check the connection
of the cables and correct connection to the PCB. Contact
technical support for additional assistance.
—
Check that external charging hoses - both red (HP) and
blue (LP) - are in good order and undamaged. In the case
of damaged hoses, discontinue use of ACX2120H until
replacement hoses are procured.
—
Verify that vacuum pump oil and ter dryer have been
replaced according to schedule for proper functioning
equipment.