MAHLE ArcticPRO ACX2120H, Руководство по эксплуатации

Страница: 15 / 40

© MAHLE
Setup | ACX2120H | 15 en
7. Setup
7.1 ACX2120H
t
From the SETUP menu, it is possible to enable/disable and
set certain parameters prior to performing A/C system service.
To access SETUP from the main menu, press
ª©
to highlight
SETUP and then press .
Parameter Description
EcoLOCK Enable/disable EcoLOCK functionality
Recharge mode Select Quick mode or Zero tolerance recharge method
Pressure check Enable/disable the pressure check
Multipass Enable/disable the Multipass function
Report saving
mode Adjust what reports are saved during A/C service
Unit of measure Modify the unit of measure for pressure and weight
Clock adjustment Modify the date and time
Language Modify the language displayed on the unit LCD display
Startup screen Select if upon power-up the unit displays the database
page or main menu screen
Default setup Restore unit default settings
t
If while adjusting settings user does not want to apply any
change made, just press
ESC
from the parameter screen to
discard the change made t rea.
7.1.1 Ecolock (optional)
Ecolock 1. From the SETUP menu, press
ª©
until is high -
lighted and press .
2. Adjust whether the EcoLOCK function is enabled or disabled
by pressing
§¨
.
3. Press
ª
to highlight SAVE , then press to save selection.
7.1.2 Recharge mode
t
For a more detailed description of the 2 charge modes, see
Section 8.3.
1. From the SETUP menu, press
ª©
until RECHARGE MODE
is highlighted and press .
2. Adjust whether the Recharge mode is in Quick mode or
Zero tolerance by pressing
§¨
. (If Zero Tolerance mode is
selected, press
ª
to highlight the pressure and use
§¨
to
adjust the value.)
3. Press
ª
to highlight SAVE , then press to save selection.
7.1.3 Pressure check
1. From the SETUP menu, press
ª©
until PRESSURE CHECK
is highlighted and press .
2. Adjust whether the Pressure check function is enabled or
disabled by pressing
§¨
.
3. Press
ª
to highlight SAVE , then press to save selection.
7.1.4 Multipass
t
Multipass is a function user can enable that will run when
unit is powered up and in an idle state. This function circu -
lates the refrigerant from the internal cylinder through the
ters to ensure optimal purity.
1. From the SETUP menu, press
ª©
until MULTIPASS is high -
lighted and press .
2. Adjust whether the Multipass function is enabled or disabled.
3. Press
ª
to highlight SAVE , then press to save selection.
7.1.5 Report saving mode
1. From the SETUP menu, press
ª©
until REPORT SAVING
MODE is highlighted and press .
2. Adjust whether all cycle reports, automatic cycles only or no
reports are saved by pressing
§¨
.
3. Press
ª
to highlight SAVE , then press to save selection.
7.1.6 Unit of measure
1. From the SETUP menu, press
ª©
until UNIT OF MEASURE
is highlighted and press .
2. Use
ª©
to select if Pressure or Gas units are to be adjust -
ed, then press .
3. Adjust the units by pressing
§¨
.
4. Press
ª
to highlight SAVE , then press to save selection.
5. If other units are to be adjusted, press
ª©
to select other
parameter or press
ª
to highlight SAVE , then press to save
any changes.