en
|
8
|
CES-6000
Assembly
7.
Assembly
7.1
CES-6000 assembly
Use care while assembling engine stand. Parts are
heavy and awkward to handle. Have another person
assist with assembly where necessary.
Use figures to assist in assembly of engine stand. If
assembly instructions are not understood, contact the
manufacturer using the contact information printed on
the back cover of this manual for assistance.
Tools Required
Small snap ring pliers
Large snap ring pliers
3/4” wrench
3/4” socket
7/16” wrench
7/16” socket
15/16” wrench
1-1/2” socket
Pliers
3/8” socket
1/8” Allen wrench
Fig. 2: Base assembly parts
1
Caster, swivel plate, 6” diameter (2)
2
Lock washer, 1/2” split type (8)
3
Nut, 1/2”-13UNC (8)
4
Cap screw, 1/2”-13UNC, 1-1/2” long (8)
5
Threaded rod, 5/8”-8 ACME (2)
6
Roll pin, 3/16” diameter, 1-1/8” long (2)
7
Crank handle (2)
8
Engine stand base (1)
9
Wheel, 8” diameter, 2-3/16” wide (2)
10
Engine stand, front wheel spacer, 3/8” wide (4)
11
Retaining ring, external, 3/4” diameter (4)
12
Engine stand, washer, 1/4” wide (4)
13
Engine stand, front wheel axle (2)
1.
Use items 2, 3 and 4 to fasten item 1 to engine stand
base (Item 8).
2.
Assemble locking screws, putting items 5, 6, and 7
together.
3.
Screw locking screws into the engine stand base to
prevent movement while assembling engine stand.
Reference Component Identification diagram if
needed.
4.
Use items 11, 12 and 13 and items 9 and 10 to
assemble front wheels on engine stand. Be sure to
put item 10 on either side of item 9 when assembling.
