en
|
4
|
CES-6000
Safety Regulations
1.
Safety Regulations
1.1
Warnings
Failure to follow all of these safety instructions can
lead to severe injury or death from a sudden loss of
the load. Contact the manufacturer at the numbers or
address printed on the back cover of this manual if
you have any questions.
Anyone who operates this product must read and
understand all the instructions and warnings
provided with this stand before being allowed to
use it.
All operators must be careful, competent,
trained, and qualified in the safe operation of the
stand. The owner (or other responsible individual)
must ensure that any operator observes the proper
safety procedures for using this stand at all times. If
the operator does not read well or is not fluent in
English, the owner / manager must read and review
the instructions and warnings in the manual with the
operator in the operator's native language to be sure
that the operator will use the stand properly.
The owner / manager must keep this manual for
future reference
, and make sure the warning labels
on the product are legible and intact at all times.
Replacement labels and manuals are available from
the manufacturer. Call the manufacturer using the
contact information on the back cover of this manual
if you have any questions.
Wear eye protection
that meets the requirements of
ANSI Z87.1 and OSHA.
Make sure the load does not exceed the maximum
capacity of the stand.
Maximum capacity is 6000 lb.
Do not exceed. Overloading can result in equipment
failure.
Never use parts, attachments, or accessories that
have not been provided by the manufacturer.
Do
not use hardware with a lower grade than what is
provided by the manufacturer.
Never modify the product in any way
.
Modifications
may cause the dolly to perform improperly, resulting
in injury or death.
Always use caution while operating this device
and
remain mindful of how the device and load will react
during operation of this device. Do not use anything
other than the supplied handle to rotate the engine.
Off-center loads may make the load and handle
rotate
in either direction when the rotational locking
device is released.
Never load stand abruptly
. Load stand slowly and
carefully. Never subject the stand to abnormal shocks
or loads. Your safety and that of others depends on
the proper operation of the stand.
Always use Anti-Rotation lever while moving
loaded engine stand.
Never allow the engine’s center of gravity to be
misaligned with the engine stand’s axis of rotation.
Ensure engine is fully secured to Engine Adapter Plate
before placing on stand.
Always apply the locking screws when stand is
being loaded and/or remaining stationary.
Always use engine stand on a hard level surface.
Be sure surface is clean and free of debris, cracks,
and chips. Avoid any uneven or dirty surfaces when
moving loaded engine stand.
Never mount anything other than automotive
engines
without accessories or attachments supplied
by the manufacturer.
Never abuse or cause damage to the stand
.
NEVER
subject the stand to abnormal shocks or loads. Your
safety and that of others depends on the proper
operation of the stand.
