VZM 300
Maintenance
8.2
D1 2010BA0-GB03
8.2
Changing the Paper Roll
Use woodfree paper only!
Equipment damage incurred due to non-compliance is not covered by the warranty.
To change the paper roll, open the top
cover of the VZM 300.
Insert new paper roll as shown.
Insert front end of roll into paper guide of
printing unit. Hold "Paper feed" key until
the printing unit will automatically pull in
the paper and the paper appears evenly
at the top.
8.3
Changing the Ribbon Cartridge
To change the ribbon cartridge, open the top
cover of the VZM 300. Lightly press right-hand
side of ribbon ("Push"), until the cartridge is lifted
on the left-hand side. Now the cartridge can be
easily removed.
If a paper roll is in the printing unit, thread the
paper between ribbon and cartridge casing.
Position the new cartridge in the printing unit.
Then push down both sides of the cartridge until
it locks into place.
Press "Paper feed" key until ribbon is properly
tightened.
