Trigger Menu
VZM 300
D1 2010BA0-GB03
4.7
4.7
Measurement with Pressure Sensor
Make sure the pressure sensor cable does not become entangled in rotating or movable
parts of the vehicle.
1. Attach the pressure sensor to the desired connection point.
2. Connect the sensor to the VZM 300.
3. Switch on the decelerometer.
4. In the Main Menu select menu item ”Start
Measurement”.
1/1*"02/"*gMR
1/14)1%QJR
5. Position the decelerometer horizontally for the offset balance.
6. Start the offset balance using <ENTER>.
,0)1g%,/)7,+1(g
8g88RQQJR
In the Setting Menu (6.2 "Program Variables") set
standard variable 34 to position 2. Now the pressure
value can be displayed during the measurement.
(g 2/8g88*N0b
/"00g98g88/
7. After the offset balance is terminated start the test.
("0"4)1
The measurement is now complete.
8. Select the printout mode. See 3.7 "Print Measurement".
9. For a measurement without printout select <1>.
/)+1,21P9S,
:S(2"0;S/-%)
This message appears:
9g"01MR
" "(g*5g9g:;
10. Use <
Í
> or <
Î
> to page through the display until
the pressure value is on the display.
9g"01MR
/ 1g#,/g*5g9g:;
