86
BA053101-en
Pos: 301 /Technis che Dok umentation/A lle G eräte/ Überschr iften/Üb erschriften 1.1/E/ Überschrift 1.1: E las tiz itäts-Mess ung @ 13\m od_1234783066014_ 75.docx @ 340193 @ 2 @ 1
10.3
Engine Flexibility Test
Pos: 302 /Technis che Dok umentation/ Leis tungsmesstechnik/POWE RDYNO/052301 LPS 3000 R100/BA/Inhalt: 0523 Elastizitäts -Messung @ 13\mod_ 1234783111865_75.d ocx @ 340219 @ @ 1
The engine flexibility can be checked using this menu point. Once the flexibility test has been called
up the vehicle mass and Road Load must be entered as in the driving simulation test. Enter the
start and finish speed of the test. Confirm using the <
> or <Return> key and then the test can
begin.
1 Position the vehicle on the dyno and fix it.
2 Call up the menu FLEXIBILITY MEASURE-
MENT.
Following screen appears:
3 Enter the parameter in the boxes using the
digit keys or
if available, load these from the database
with the <F6 DATABASE> key.
4 Use the button<F8 CONTINUE>.
Use the cursor keys <
↓
> and <
↑
> to change between the values. Delete erroneously entered
characters using the <BACKSPACE> key. Delete a complete box with the <DELETE> key.
5 Drive in desired gear and before the start
speed is reached, apply full throttle.
The test stand starts recording the time.
6 The duration of the measurement and the
measurement value are displayed.
Pos: 303 /-----Format- ----/MANUE LLE R UMBRUCH Seitenumbruch @ 0\mod_ 1134403577687_0.docx @ 1277 @ @ 1
