28
BA690101-en
While the vehicle is being accelerated to target speed, make sure there are no
activities that could result in a deceleration of the wheels!
Master-Slave Mode
5 After switching on the drives (see step 2), touch button
.
The master-slave mode is indicated
.
6 Engage a gear (with automatic transmission shift to <D>, with rear-drive
vehicles slowly release the parking brake), gradually accelerate, perform a trial
run.
Sudden accelerating or braking can result in drive errors!
4.6
Using the Tyre Pressure Control
1 Start the engine, shift into "Neutral".
2 Push
.
The drives are switched on, a countdown timer (preset test duration) begins
running.
3 Select
,
,
or
.
The active button lights green.
4 Enter the target speed (60 kph) using button
or
.
A message regarding tyre pressure control appears after approx. 100 seconds
at the vehicle cockpit.
5 Enter target speed (0 km/h) using button
.
6 When the actual speed is 0 km/h, terminate the test.
To repeat the test with another wheel, the tyre pressure control must be re-
initialised at the vehicle!
