29
BA690101-en
4.7
Terminating the Test
1 Push
.
The drives are slowly stopped via a speed ramp.
2 Push
.
The driving test bench lowers into bottom position.
The sliding device at the rear wheel must be fixed.
3 Engage first gear (automatic transmission: P) and pull on the parking brake.
4 Turn the selector switch to "DUO".
5 Lower the vehicle with the wheel-free jack until the support blocks can be
removed.
Make sure the extensions of the wheel-free jack do not contact the driving test
bench. Risk of damage!
6 Slide the wheel-free jack extensions as required, so that the test bench and
wheel-free jack are not damaged while lowering the vehicle..
7 Fully lower the wheel-free jack.
8 Release the parking brake and drive the vehicle off the test bench.
4.8
Switching out
1 Quit the program.
2 Turn off the main switch.
Pos: 55 /-----Format-----/MANUELLER UMBRUCH Seitenumbruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1
