23
BA364501-en
4.4
Raising and Lowering Cycles
4.4.1
Inspection of the Load Pick-up Points and Support Arm Locks
Set the main switch to position 1.
After an initial flashing of all three lights, the UP button is permanently lit.
Press the UP button until the support discs are in contact with the pick-up points of
the vehicle.
Check the position of the support discs and correct if necessary.
Check that support arms lock securely. If necessary, move the support arms slightly
until the toothed segments are engaged.
CAUTION
Never pull the lock pins under load!
Lock pins with toothed segments
4.4.2
Continuation of the Raising Process
Continue the lifting process by pressing the UP button until the desired lifting height
is reached.
UP and DOWN buttons are lit.
