25
BA364501‐en
5
Inspection and Maintenance
5.1
Safety Information
WARNING
The relevant health and safety regulations must be observed.
Wear personal protective equipment.
Service work may only be carried out by authorised service technicians.
Repairs, maintenance and set‐up work may only be carried out when the machinery
is stationary. The unit must be disconnected from the power supply and secured
against being switched on again.
Work on the electrical part of the lift may only be carried out by qualified staff or
specialist electricians.
ATTENTION:
The 230V plug sockets on the operation unit(s) still carry power even
after the system has been switched off!
Maintenance and repair work may only be carried out when the lift is load‐free.
Only use original replacement parts.
Substances that are hazardous to the environment must be disposed of appropri‐
ately.
Do not use high or steam pressure equipment or harsh cleaning agents to clean the
lift.
The safety features of the lift must be set by authorised service technicians.
The safety features must not be replaced or overridden.
5.2
Inspection and Maintenance Plan
Daily before operating
Check the support arm extension stops.
Check the functioning of the support arm locks.
Visual check of the circlips on the support arm pins and the threaded inserts of the
support discs
Weekly
Check function and wear of load carrying equipment, replace as necessary.
Check support arm locks for wear.
