MAHA AL II 2.0, Руководство по эксплуатации

Страница: 25 / 31

25
BA082201-en
8 Operation
CAUTION
Risk of personal injury and property damage

Before each lifting procedure, check whether the running gear of the axle jack is
correctly placed.

It is the operator’s responsibility to make sure that operation represents no
danger to persons.

The axle jack is to be used as lifting device only. Never transport the load using
the axle jack.

Before working on the vehicle, lower the axle jack to nearest safety notch.

When lifting a vehicle with two axle jack units, they must have a minimum sepa-
ration of 0.85 m.
8.1 Operation of AL II 2.0 / 2.6
Raising
1 Use the pump lever.
2 After reaching the desired lifting height, turn the left-hand lever to the right to
lower the axle jack to the nearest safety notch.
Lowering
1 Slightly raise the axle jack to release the safety lock.
2 Turn both hand levers to the left.

Left-hand lever is used for operating the trigger valve, right-hand lever for
release of safety lock. Both levers return to the original position after release.
8.2 Operation of AL II 2.0 PH / 2.6 PH / 4.0 PH
Raising
1 Turn the left-hand lever to the left.
2 After reaching the desired lifting height, turn the left-hand lever to the right to
lower the axle jack to the nearest safety notch.
Lowering
1 Slightly raise the axle jack to release the safety lock.
2 Turn both hand levers to the left.

Left-hand lever is used for operating the trigger valve, right-hand lever for
release of safety lock. Both levers return to the original position after release.