21
BA082201-en
Liftout guard
End stop
(L) = Left
(R) = Right
(A) = Stop
(B) = Lock
Positioned Axle Jack
Left liftout guard, left (L) + Stop (A)
Right liftout guard (R) + Lock (B)
Workflow (Initial Installation)
1 Install the lift.
2 Install the floor cover.
3 Mount the axle jack.
4 Replace the Right liftout guard (R) with the liftout guard premounted to the axle
jack; see „Positioned Axle Jack“.
Replacement of the Right liftout guard (R) is necessary only on the side with the
Lock (B)!
5 Position the premounted Lock (B) and Stop (A) so that the axle jack can be
lowered into the floor cover/foundation without collision.
Open screws (a)
Adjust (B) + (A)
Tighten screws (a).
a
b
a
b
c
