MAGUIRE Weigh Scale Blender, Руководство по эксплуатации и техническому обслуживанию

Страница: 31 / 81

31
KEYSTROKE SEQUENCE for these or other SPECIAL FEATURES:
Making Changes to Parameters - Keypad Sequence:
Switch the STOP END OF CYCLE switch DOWN :
Turn
POWER ON . Wait 5 seconds, until display says ( x)
Press
Display will say: (PASSWORD)
Press
Display will say: (P x)
This is the
PROGRAM MODE
To alter a PARAMETER:
Press
Press repeatedly until the parameter you want is displayed.
If you accidentally pass it, use the * key to back up.
With the proper parameter displayed, enter the NEW number.
Enter 5 digits; use leading zeros if necessary.
For correct entries, follow specific directions given in the
PARAMETER section.
Press Display will say: ( P x)
Press Display will say: (SAVING )
This saves the changes made
Press Display will say: ( P x) when settings are complete.
Making Changes to * Functions - Keypad Sequence:
Press Display will say: (PASSWORD)
Press Display will say: (P x)
This is the
PROGRAM MODE
Press Display will say: (INSTR __)
Press
xx
Enter the 2-digit code.
For correct entries, follow specific directions given in the
KEYPAD section, STAR FUNCTIONS .
Press
Display will say: ( P x)
Press Display will say: (SAVING )
This saves the changes made
Press Display will say: ( x) when settings are complete.