MAGUIRE Ultra-600, Установка, эксплуатация и обслуживание

Страница: 49 / 109

Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
49
ULTRA By Maguire

- Ultra Low Energy Dryer
RMP - Temperature Ramp Settings
format: xyyzz (increments / minutes / °F or °C)
function(s): x: Number of temperature steps during a temperature ramp.
yy: Duration of a temperature ramp.
zz: Temperature span of a temperature ramp.
CTM - Cooldown Temperature
format: xxxxx (°F or °C)
function(s): Heating hopper cooldown temperature target.
Note: Cooldown mode must be enabled for this parameter to have effect.
CTR - Cooldown Timer
format: xxxxx (minutes)
function(s): Heating hopper cooldown time.
Note: Cooldown mode must be enabled for this parameter to have effect.
H1W - Heating Hopper Heater Wattage
format: xxxxx (Watts)
function(s): Wattage of the primary heater. This value is used in energy consumption calculations.
PGS - Purge Heater Setpoint [ULTRA-600 and ULTRA-1000 only]
format: xxxxx (°F or °C)
function(s): Purge / blanketing air setpoint temperature.
PT2 - Purge Heater Proportional Term [ULTRA-600 and ULTRA-1000 only]
format: xxxxx (constant)
function(s): Purge heater PID control loop proportional term. This term makes adjustments to the
purge heater output that are directly proportional to the current error.
DT2 - Purge Heater Derivative Term [ULTRA-600 and ULTRA-1000 only]
format: xxxxx (constant)
function(s): Purge heater PID control loop derivative term. This term makes adjustments to the
purge heater output that are proportional to the slope of the error over time. The
purpose of this term is to make predictive adjustments to help mitigate overshoots (and
undershoots).