MAGUIRE Ultra-600, Установка, эксплуатация и обслуживание

Страница: 83 / 109

Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
83
ULTRA By Maguire

- Ultra Low Energy Dryer
Pump Assignment -
Pumps must be assigned before Receivers.
Flexbus Lite controls a single pump. The Flexbus System can control of to 5 pumps. If you have two or more pumps (Flexbus only), turn
OFF all pumps prior to running Setup in the Flexbus controller, otherwise: To assign Pumps, follow these instructions:
On the
HOME
screen,
PRESS:
Pressing the SETUP button prompts for a password.
PRESS:
22222
Enter the password (default password is 22222)
Press to confirm password.
This enters the Setup screen. This screen contains several setup specific options.
To setup
Pumps:
PRESS:
Press the large Pumps button on the far left of the screen.
This enters the PUMP assignment screen. This gray screen contains any previously assigned pumps. For first time setup, this screen is
probably blank and no pumps have been assigned.
At this time, turn on your Flexbus Lite Pump to assign.
With a single pump, that pump will appear on the
screen and be labeled with the number 1.
PRESS:
To return to the Setup screen. When you return to the Setup screen, the Pump
button will show the Setup symbol on the Pump button indicating that you are
still in the Pump Assignment mode.
PRESS:
To Exit the Pump Assignment Mode . Setup icon overlaying the button will
disappear indicating you are out of Pump assignment mode.