MAGUIRE Ultra-600, Установка, эксплуатация и обслуживание

Страница: 91 / 109

Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
91
ULTRA By Maguire

- Ultra Low Energy Dryer
Flexbus Lite System Setup Options
The Setup screen also allows for setting: Date and time, screensaver timeout, screen brightness, screen calibration,
updating Flexbus controller and receiver/pump firmware, changing the password, language selection and date format.
To enter Setup press the Setup button on the home screen. Default password is 22222.
Set Date and Time
Set Screen Brightness
Update Receiver and Pump Firmware
Requires a firmware update provided by Maguire Products Inc. Copy firmware (.XUF file) to USB and insert USB
into the controllers USB port. Press this Update button. Press the green check to start the update. The
firmware update will be copied from the flash drive to the Pumps and Receivers that require the update (up-to-
date firmware will not be changed). When the copy has completed, you will be prompted to toggle power (off/on).
Updates to devices are logged in the Alarm/Event log.
Change Passwords
Set the Operator password and the Administrator password.
Operator Password - When enabled, all Pump and Receiver parameter fields are password
protected.
Administrator Password - Changes the Administrator password.
Type the new password, then type the password again in the 2nd field to confirm. Valid passwords are numbers
0-9, 1 to 6 characters long. Press the green check when complete.
Set Language