Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST, Инструкция по эксплуатации

Страница: 20 / 47

M A G U I R E P R O D U C T S , I N C .
20
G R A V I M E T R I C A U G E R F E E D E R

Changing Passwords
For security purposes, you may want to change the factory password to protect setup
configuration from unauthorized modification. The default password is “22222”. Five digits (0
through 9) are required. A modified password will not reset back to factory default after a
software upgrade. If you changed the password but forgot what it is, please contact Maguire
Products. The following describes how to change the factory password.
Press
Display will prompt for a password.
(admin default: 22222)
Then press:
Press
System Configuration
Display will show the System Configuration categories.
Press
Preferences
Display will show System Preferences categories.
Press
Change Passwords
Display will show two options, Change Admin Password and
Change Operator Password. Select the password you wish to
change.
Enter
the new password
then enter the password again to confirm.
Press
To save the changes or press the
red X to cancel and exit.
Weight Units
Changes the displayed units for the Per Hour Rate and on-screen totals.
Select Pounds, Grams or Kilograms.
Press
Display will prompt for a password.
(admin default: 22222)
Then press:
Press
System Configuration
Display will show the System Configuration categories.
Press
Preferences
Display will show System Preferences categories.
Press
Weight Units
Select Pounds, Grams or Kilograms
Press
To save the changes or press the
red X to cancel and exit.