Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST, Инструкция по эксплуатации

Страница: 23 / 47

M A G U I R E P R O D U C T S , I N C .
23
G R A V I M E T R I C A U G E R F E E D E R

Print Parameters
The MGF is controlled by a set of internal parameters. Most of the parameters are
configured from factory to optimal default parameters but can be changed to
optimize operation to conditions. A full parameter report can be printed to USB from
the Print Center.
Example of a Parameters Report:
FIRMARE: R0827A
GRAVIMETRIC FEEDER ID# 000 WO 000000 RECIPE 00000 OP 000 MODEL 50
IP ADDRESS:192.168.0.1 SUBNET:255.255.255.0 GATEWAY:0.0.0.0
MODE: CYCLE
GENERAL PARAMETERS
NAME RAM ROM
LDR 500 200
SHT 500 200
PHR 2 200
FUL 3500 3500
PRT 1 0
KDF 6 6
LCZ 583 583
MTF 136 75
XCV 2 0
XRC 40 40
XAL 5 5
XUL 200 200
XMO 1000 1000
LBE 30 30
UBE 300 300
NBW 100 100
LWA 400 400
ATP 50002 51005
RTU 305 305
ADJ 3005 3005
LLF 500 500
LHF 2000 2000
LAT 120 120
STL 10 10
NWA 100 100
XMR 0 0
To the left is an example of a
parameters report. This report prints
the current parameter settings loaded
into RAM (those that are currently in
use) as well as parameters in ROM
(factory defaults), current firmware
version, MGF model, current mode of
operation, and communications
specific settings (ID#, IP address,
subnet, gateway). Also available is
work order number, recipe number
and operator number which are set
via the MLAN protocol and Modbus.