Section 6. 4777 Emulation Mode
39
Select option to change
Esc=exit
I)dle Display E)ncode Energy
C)ard Time
6. Select the
I
dle Display messages and the following will appear:
Select line to edit
Esc=done
Press
T)op line
B)ottom line
7. The top line and bottom lines can be independently modified. Select
T
for the top line or
B
for the bottom line.
8. Type any message you wish to appear when the unit is idle. The
Insert
key can be used to
toggle between insert and overstrike modes. The message can be left-, right-, or center-
justified by pressing
F3
on the keyboard. The other editing keys, e.g., home and arrows, can
be used to move the cursor. When the message is satisfactory, press
Enter
. Edit the other
line in the same manner.
9. The two-line message will be saved in battery-backed RAM until this process is used to
modify the message.
10. Press
Esc
twice to return to the main menu.
11. Turn the power off.
12. Disconnect the keyboard.
13. Connect the communication cable.
14. Turn the power on.
MODIFYING ENCODE TIMEOUT
1. Turn off power switch on MT-95.
2. Disconnect the communication cable.
3. Attach an AT-style keyboard.
4. Turn on the power switch.
The following will appear briefly on the LCD:
Please wait during system self test
Then the following will appear:
Mag-Tek MT-95
P/N: 30060819
Rev:J07
S)etup
5. Select
S
etup from the menu and the following will appear:
Содержание MT-95
