MICRSafe with 3-Track MSR
56
08
INCORRECT FORMAT
Possible causes for this problem are:
•
Incorrect Format Number - the current Check data format in the MICRSafe is not the desired
format. Use the “Configure” option within MICRbase to verify/change the format.
•
Incorrect Message Format - the current Message format in the MICRSafe is not the desired
format. Use the “Configure” option within MICRbase to verify/change the Message format.
Determine if any of the conditions described above are true:
◊
If yes, rectify and continue to step 02.
◊
If no, continue to step 18.
09
PATH IS OBSTRUCTED
Foreign debris is obstructing the check path:
•
Loose debris - power off the MICRSafe and try to push out any loose debris on the check
path. Grab a cleaning card and force it through the check path (this is a manual process, the
motor will not turn on). Try this procedure several times until the debris comes out. Power
on the MICR Reader.
•
Wedged debris - the debris is wedged in and cannot be removed with the procedure described
above.
Is the foreign debris removable?
◊
If yes, remove and continue to step 02.
◊
If no, continue to step 18.
Содержание MICRSafe
