Magtec MT8816, Руководство пользователя

Страница: 35 / 78

Playback AHD Hybrid DVR User Manual
30
Go to Main Menu

Setup

Record

Snap as shown below. You can set auto snap here.
①
Set resolution, image quality, snap time interval and snap number.
②
Click “Apply” to save the settings. The system will automatically capture pictures
according to the setup.

Taking Snapshots on Motion Alarm
①
Go to Main Menu

Setup

Alarm

Motion. Enable motion alarm and then set the motion
detection area (see Chapter 9.2 Motion Alarm for details).
②
Go to alarm handling setting by click “Setting” button under Trigger. Then checkmark the
snapshot channel and click “OK” button to confirm the settings.
③
Set schedule for motion alarm. The setting steps are similar to normal schedule recording
(See
Chapter 6.3 Schedule Recording for details).
④
Click “Apply” to save the settings. The picture will be automatically captured once a
motion alarm happens.

Taking Snapshots on Sensor Alarm
Some models may support this function.
①
Go to Main Menu

Setup

Alarm

Sensor. Enable sensor alarm and choose the sensor
type.
②
Go to Alarm Handling tab. Then click “Setting” button under Trigger. An alarm trigger
box will pop up. Then select the snapshot channel and click “OK” button to confirm the
settings.
③
Set schedule for sensor alarm. The setting steps are similar to normal schedule recording
(See
Chapter 6.3 Schedule Recording for details).
④
Click “Apply” to save the settings. The picture will be automatically captured once a
sensor alarm happens.
7.5.2 Playback by Picture Search
①
Go to Main Menu

Search

Image tab.
②
Select data and channels on the right hand side.
③
Press “Search” button to search for a recorded image.