Magtec MT8816, Руководство пользователя

Страница: 14 / 78

Basic Operation AHD Hybrid DVR User Manual
9
Entering password by remote controller
If you want to enter “123456” by IR remote controller, you shall follow the following steps.
①
Move the cursor to password box and then press “Enter” button on the remote controller
to pop up a little soft keyboard.
②
Move the cursor to “1” on the little soft keyboard and then press “Enter” button on the
remote controller. Next, input “2”, “3”, “4”, “5”, “6” separately like that.
③
Move the cursor to “Enter” button on the little soft keyboard and then press “Enter”
button on the remote controller.
Controlling Multiple Devices by remote controller
The default device ID of the AHD Hybrid DVR is 0. It’s not necessary to reset the device ID
when a remote is to be used to control a single device. However when controlling multiple
devices with multiple remote controllers, you would need to configure the device ID, please
refer to below steps:
①
Activate remote controller to control the device: Turn the IR sensor of the remote
controller towards the IR receiver on the front panel, press the number key 8 twice on the
Button Function
REC Record manually
Search To enter search mode
MEUN To enter menu
Exit To exit the current interface
ENTER To confirm the choice or setup
Direction button To move cursor in setup
ZOOM To zoom in
PIP To set picture in picture
To control playback. Play/ Pause/ Stop/ Previous
Section/Next Section/Backward/ Forward
Multi To choose multi screen display mode
Next To switch between single picture and picture group
SEQ To go to auto dwell mode
INFO
Get information about the device like firmware version,
HDD information