Magnum MIG 208 Alu Synergy, Руководство пользователя

Страница: 7 / 24

7
and)
When welding on scaffolding check the status of their efficiency.
j)
Protect respiratory system, eyes, face and hands from burns and exposure through the use of appropriate
personal protection.
k) Switch individual air extraction, when this is established, the gaseous effluents are removed from the position.
l) Use only proper, undamaged and not oiled tools and support workshop.
3.4. Prohibited Actions.
Welder forbidden:
a) gripping the prepared hot metal welding or after welding.
b) Isolated repair damaged electrical cables (electrical system).
c) During work breaks stick under his arm electrode holder.
d) masks moving away too far from the welding face, her deposition before the arc goes out, as well as inflammation of the
arc without face protection.
e) Welding without proper grounding of the workpiece.
f) Use makeshift combination of welding equipment.
f) Use makeshift combination of welding equipment.
g) Cause to the floor at the work station was wet, slippery, uneven, contaminated waste,
previously blocked.
3.5. Basic activities after work.
Welder should:
a) Switch off the welder energized.
b) Check whether the welding position or a position next to the fire was not dusty.
c) Organize your work station, remove the tip electrodes and welding slag.
d) Organize welding equipment.
3.6. Final remarks.
a) When performing welding work inside the tanks, boilers or other confined spaces (to 15m3), a
welder should be insured by another person, who will remain on the outside.