Magnum MIG 208 Alu Synergy, Руководство пользователя

Страница: 13 / 24

13
Upon rotation of the knob to the right or left of the display will change the numerical value of wire feed speed, thickness
of the material in millimeters, and graphical thickening or thinning of the material:
Depending on the thickness of the material will also appear ATC symbol. ATC is an advanced thermal control
function, activated when welding thin materials to a thickness of 1.5 mm.
ATC function stabilizes the arc and reduces the peak value of the welding current by reducing the amount of heat transferred to
the material. As a result, greatly facilitates the welding of thin elements and results in smaller deformations of the material, and
less overheating of the narrow heat affected zone.
In turn, the lower knob is used to weld the upregulation shape (arc length) -9 ÷ 9. The display will change
the shape of the graphic indication of the weld:
The shape of the convex is the low thermal load in low merging the material. Shape intermediate the
recommended setting the average fusing the material. The shape of the concave is a high thermal load
and at a high merging the material.
LIST synergic programs
Ar * - Use of gas recommended by the manufacturer of wire.
In the case of self-shielding wire, the use of shielding gas is not required.
stuff
The wire diameter [mm]
shielding gas
fe - constantly ordinary fe - constantly ordinary
0.6 / 0.8 / 1.0
WHAT
2 /
Ar + CO
2
WHAT
2 /
Ar + CO
2
WHAT
2 /
Ar + CO
2
WHAT
2 /
Ar + CO
2
ss - stainless steel and acid-resistant ss - stainless steel and acid-resistant 0.8 / 1.0
Ar + O
2 /
Ar + CO
2 (
1-2%) Ar + O
2 /
Ar + CO
2 (
1-2%) Ar + O
2 /
Ar + CO
2 (
1-2%) Ar + O
2 /
Ar + CO
2 (
1-2%) Ar + O
2 /
Ar + CO
2 (
1-2%)
Al - aluminum and aluminum alloys Al - aluminum and aluminum alloys 0.8 / 1.0
ar
CuSi, CuAl - braze CuSi, CuAl - braze
0.8 / 1.0
ar
Flux - welding cored wire Flux - welding cored wire
0.8 / 0.9 / 1.2
ar *