Magnum MIG 208 Alu Synergy, Руководство пользователя

Страница: 11 / 24

11
Pressing the knob for 2 seconds or more and release to enter the menu where
you can choose the method of welding.
The selection is made by turning the knob in either direction. The selected
symbol will then blink. The choice must be confirmed by briefly pressing the
knob.
SON - MIG-MAG settings synergistic. SON - MIG-MAG settings synergistic.
MAN - MIG-MAG settings manual operation MAN - MIG-MAG settings manual operation
(conventional).
Welding MMA
TIG LIFT.
If you choose MMA or TIG LIFT remains only to set the value of the welding current, which is done by
turning the upper knob.
When selecting the method of MIG-MAG manual operation of setting the top dial to be adjusted
wire feed speed, the lower knob voltage value of the
welding current. The set value will be shown on the
display.
The value of the welding current, appears only during
welding.
While in manual mode MAN You can also select spot While in manual mode MAN You can also select spot While in manual mode MAN You can also select spot
welding, and the behavior of the control button that is 2t and
4t.
To select one of the above,
press
not less than 2 seconds the lower knob until the symbols are as follows. Spot
welding symbol will flash.
By rotating the bottom knob occurs on / off (off) the function
and time setting welding point. Range: OFF, 0.1 ÷ 5.0 [s]. At
the time of selection of spot welding and welding time is set at
the point, there is no choice of 4t.