Magnum MIG 208 Alu Synergy, Руководство пользователя

Страница: 20 / 24

20
90% He + 7.5% Ar +
2.5% CO
2
2.5% CO
2
weakly oxidising Corrosion resistant, short-arc welding
60% He + 35% Ar + 5%
WHAT
2
WHAT
2
oxidising
Low alloyed steels, high-impact, short-arc welding
8. CLEANING AND MAINTENANCE
Degree of protection of this device is IP21S, so, do not use the unit in the rain, or expose it to
moisture.
ATTENTION:
A device based on electronic components. Grinding and cutting in the vicinity of
the welding device can contaminate the swarf inside the device, thus leading to damage.
The above-mentioned damage is not covered by warranty! In the case of having to work
in such an environment must be made to clean the machine by blowing compressed air
inside of the welder.
To extend the service life and reliable operation, observe a few rules:
1. The device should be placed in a well-ventilated room, where there is a free circulation of air.
1. The device should be placed in a well-ventilated room, where there is a free circulation of air.
2. Do not place the device on a wet surface. 2. Do not place the device on a wet surface.
3. Use a wire diameter and a weight of the spool in accordance with disposed on the table. 3. Use a wire diameter and a weight of the spool in accordance with disposed on the table.
4. The gas cylinder protective set on the shelf at the back of semi-automatic and secure with chain 4. The gas cylinder protective set on the shelf at the back of semi-automatic and secure with chain
against the possibility of tipping.
5. Check the condition of technical equipment and welding cables. 5. Check the condition of technical equipment and welding cables.
6. Remove all flammable material from the welding area. 6. Remove all flammable material from the welding area.
7. Welding use suitable protective clothing: gloves, lab coat, shoes, a mask or helmet. 7. Welding use suitable protective clothing: gloves, lab coat, shoes, a mask or helmet.
When planning the maintenance of the device should take into account the intensity and operating conditions. Proper
use of the equipment and its regular maintenance will avoid unnecessary disruption and downtime.
Daily:
ABOUT Purify the handle by weight, and the gas nozzle chips, means lubricate against frangibility. ABOUT Purify the handle by weight, and the gas nozzle chips, means lubricate against frangibility.
ABOUT Check whether the cables are correctly connected. ABOUT Check whether the cables are correctly connected.
ABOUT Check the condition of the pipes. Replace damaged cables.
ABOUT Check the condition of the pipes. Replace damaged cables.
ABOUT Make sure that the device around the free flow of air. ABOUT Make sure that the device around the free flow of air.
ABOUT Replace or repair damaged or worn parts. ABOUT Replace or repair damaged or worn parts.