Magnum MIG 208 Alu Synergy, Руководство по эксплуатации

Страница: 7 / 24

and)
j)
use of appropriate personal protection.
k) Turn on the individual air extraction, if one is installed, so that the gaseous fumes are removed
from the station.
l) Use only correct, undamaged and free of oil tools and aids
workshop.
3.4. Prohibited activities.
A welder is prohibited from:
a) Gripping hot metal that is ready for welding or after welding.
b) Repair damaged electric cables (electrical system) yourself.
c) During breaks in work, keep the electrode holder under the armpit.
d) Moving the welding mask too far away from the face, putting it down before the arc goes out,
and igniting the arc without face protection.
e) Welding without proper grounding of the workpiece.
f) Use a makeshift combination of welding equipment.
g) Cause the floor at the workplace to be wet, slippery, uneven,
contaminated with rubbish, obstructed.
3.5. Basic post-work activities.
The welder should:
a) Disconnect the welding machine from voltage.
b) Check that no fire has occurred during welding at or next to the stand.
c) Tidy up the workplace, remove the electrode tips and welding slag.
d) Organize the welding equipment.
3.6. Final remarks.
a) When welding works inside tanks, boilers or other closed rooms (up to 15
m3), the welder should be insured by another person outside.
When welding on scaffolding, check the condition of their efficiency.
Protect respiratory system, eyes, face and hands from burns and exposure to light
7