Magnum MIG 208 Alu Synergy, Руководство по эксплуатации

Страница: 11 / 24

Pressing the knob for 2 seconds or longer and releasing it causes
entering the menu where you can choose the welding method.
The selection is made by turning the knob in any direction.
The selected symbol will then flash. Confirm your selection
by briefly pressing the knob.
SON - MIG-MAG welding with synergic
settings.
MAN - MIG-MAG welding with manual
settings (traditional).
MMA welding
Welding with the TIG LIFT method.
When selecting the MMA or TIG LIFT method, only the welding current value remains
to be set by turning the upper knob.
If the MIG-MAG method with manual settings is selected, the upper knob is adjusted
wire feed speed, the value of the welding
voltage with the lower knob. The set value will
be shown on the display.
The value of the welding current will be shown only
during welding.
Being in manual mode MAN you can also choose
spot welding and the behavior of the control
button, i.e. 2t or 4t.
To select one of the
above, press
not shorter than 2 seconds the lower knob until the following symbols
appear. The spot welding symbol will flash.
By turning the lower knob
this function is turned on / off and the welding
time at point is set.
Adjustment range: OFF, 0.1 ÷ 5.0 [s].
At the moment of selecting spot welding and setting the
welding time at the point, it is not possible to select 4t.
11