Magnum MIG 208 Alu Synergy, Руководство по эксплуатации

Страница: 14 / 24

5.2 Advanced Settings.
The MIG 208 Alu Synergia device has the ability to adjust additional, advanced parameters for the
MIG-MAG method, both in synergic and manual mode.
Wire starting speed (approaching). Regulation in the range of 30 ÷ 100 [%] of the feeder's
rotational speed.
Inductance regulation. Adjustment in the range of 0 ÷ 5.
Higher inductance (soft arc) results in a wider weld pool and less spatter.
Conversely, the lower inductance produces a stable, focused arc.
Burn back height after welding. Adjustment in the
range of 0 ÷ 200 [ms].
Gas flow time after completion of welding.
Adjustment in the range of 0 ÷ 5 [s].
To enter the menu that allows you to adjust the above parameters,
press and hold both adjustment knobs simultaneously for at least 2
seconds.
Adjustment is done by turning the lower knob.
Moving to the next parameter, confirming and exiting the
menu by briefly pressing the lower knob.
14