6.
KIT CONTENTS
The following items should be included in the kit:
Welding device
MIG / MAG work cable
MMA work cable
Cable with ground clamp
Feed roller kit.
x 1 pcs
x 1 pcs
x 1 pcs
x 1 pcs
Attention!
For the safety of children, do not leave freely accessible parts of the
packaging (plastic bags, cartons, polystyrene, etc.).
Danger of suffocation!
7. USE
7.1 Connecting to the network
Before attaching this
mains equipment must be checked for size
voltage, number of phases and frequency.
The parameters of the supply voltage are given in the technical data section of this manual and on
the rating plate of the device.
Check the connections of the equipment grounding conductors to the mains.
Make sure that the mains power supply can cover the input power demand of this
device under normal operating conditions.
The fuse size and power cord parameters are given in the technical data of this
manual.
The supply network should be characterized by a stable voltage. The cross-section of the
power cables should not be less than 2.5 mm.
Connect devices without power plugs according to the following tips.
Connection and replacement of the power cord and plug should be performed by
a qualified electrician.
The yellow-green wire is the ground and should always be connected to the socket marked
with the grounding symbol, regardless of whether we are dealing with a 230 [V] or 400 [V]
power supply.
Earth symbol.
15
Содержание MIG 208 Alu Synergy
Страница 2: ...2...
Страница 24: ...WWW SPAWSC PL WWW MAGNUM WELDING COM Cracow 2017 KR v1 24...