Magnum Industrial MI-93050, Руководство пользователя

Страница: 15 / 22

- 13 -
Vertical Cutting (optional)
1. Fasten the supporting bar (A) in Fig. 7
into the slot at the saw head.
2. Raise saw head to vertical position by
lifting up the knob (B) a little to release
the lock-pin and slide it into the slot which
is set for 90 degree.
3. Remove the small plate (C).
4. Install an attached fold plate to (C)
position, and tighten it with two screws at
(C) location, clamping another side in the
vise.
5. Before cutting a bigger work, take away
the carrying handle (E). After service,
replace the handle.
Caution: Be sure that the machine is
disconnected from the power source
before attempting to service or take any
component away !
Toggle Switch
The band saw is equipped with the toggle
switch which is designed for operating safety
and easily, push toggle switch up to start the
blade running. After cutting the toggle switch
will be press down and cut off the motor
power.