Magnum Industrial MI-93050, Руководство пользователя

Страница: 13 / 22

- 11 -
Electrical Connections
This band saw is designed for use on a circuit
with an outlet that looks like (A) in Figure on
the right hand side. This saw has a
grounding prong as the right illustrated in (B).
A temporary adapter (C) may be used to
connect the plug to a two pole receptacle (D)
if a properly grounded outlet is not available.
This temporary adapter should only be used
until a properly grounded outlet can be
installed by qualified electrician. The green
colored lug must be securely fastened to the
cover plate screw.
Anti-Skid Rubber Ring
The drive blade wheels used rubber rings (A)
in Figure 5 on this band saw is designed to
prevent blade skidding off from the flanges,
and to keep the machine running smooth.
Thus, blade can be freed from friction with
wheels and prolong its life. And certainly,
the noises can be reduced at the same time.
In order to remain the machine in good
performance, it is necessary to change the
rubber ring once in a year, or to depend on
certain conditions such as machine running
not smoothly, blade sliding in movement,
noise level over 70 db, and so on.