Magnum Industrial MI-93050, Руководство пользователя

Страница: 11 / 22

- 9 -
6. Description and Characteristics
1. This 4” portable band saw is made as
light as 23 kgs by weight & equipped with
an easy carrying handle for your fitness
to transport to any worksites.
2. The body of this machine is formed with
Aluminum Die Casting such that body
construction of it becomes sturdier and
appearance smoother and more
acceptable.
3. During operation, the noise level of this
machine is about 60 db which is mush
less than any of the other band saws,
and of course, it can present a
comfortable working environment.
4. This machine is made ready for the blade
tension adjustment by holding the handle
to give a little turn for the tension
increasing, or decreasing as you wish
during the period of blade replacement or
machine in operation. Also attached with
the handle, there are a couple of
compression springs set up for reducing
vibration that is from a defective
workpiece popping while machine is
running. It permits the blade to be used
much longer.
5. The drive of this machine is through gear
transmission that gives steadier, stronger,
and smoother cuts superior to any of
pulley drive band-saws, and make less
trouble after service. Note: If anything
unusual happens on your gear
transmission system, do not try to fix or
restore it personally. Send it back to your
dealer for check-up or repairing. Failure
to comply can result in machine damage.
6. The machine combines miter, vertical
and horizontal cutting and is designed for
full efficiency and operator convenience
in each position.
7. An auto shutoff assures the complete cut
work, thus permitting unattended
operation.
WARNING
SHUT OFF THE POWER SOURCE ALL
THE TIME, BEFORE THIS MACHINE IS
IN MAINTENANCE, OPERATION,
ADJUSTMENT, OR REPAIRMENT.
WARNING
Disconnect machine from the power
source !
No matter when, where, or how. Pay extra
attention to the saw during it in
transportation, operation, maintenance, or
adjustment.
Failure to comply may cause serious
injury !