©
2006 Magnum Energy Inc
.
1.0 Introduction
Congratulations on your purchase! The MM Series remote control from
Magnum Energy, Inc. is designed to be simple to install and use, allow
easy control and quick indication of the inverter’s (and charger) status.
Remotes Available
The MM-R and the MM-RC are the two MM remote controls available to
use with the MM Series inverter. The appropriate remote to use
depends on whether your inverter includes the battery charger
feature. For MM Series inverters that do not have the battery charger,
the MM-R is the recommended remote; for MM Series inverters that do
have the battery charger, the MM-RC is the recommended remote.
Depending on your inverter model, you can select one of the following
remotes:
MM-R - Provides three LED indicators for inverter status and includes a
remote ON/OFF switch; comes with 25’ cable. This remote is for MM
Series inverters without the battery charger feature; such as the
MM612 (requires serial number L1-201 or higher) or MM612G models.
MM-RC - Provides six LED indicators for inverter and charger status,
includes a remote ON/OFF switch; comes with 25’ cable. This remote is
for MM Series inverters with the battery charger feature; such as the
MM612AE, MM1212 or MM1212AE models.
Figure 1, MM Remotes
MM-R
MM-RC
BULK
ABSORB
FAULT
FLOAT
AC IN
INVERT
ON/OFF
INVERT
AC IN
FAULT
ON/OFF
1.0 Introduction
Basic Features
• Colored LED’s (Light Emitting Diodes) located on the front panel for
easy viewing of system status.
• RJ11 phone jack connection on remote for easy connection to
inverter.
• Status and information indicators used to determine system perfor-
mance and operating conditions including: inverter operation, charger
operation and any faults that occur.
• ON/OFF push-button for easy control of inverter and charger
operation.
• Easy installation and included mounting ring to give installers a
choice for mounting.
1
