Magnum Energy ME Series, Руководство оператора

Страница: 54 / 77

3. Operation,
continued
S o f t K e y s , c o n t i n u e d :
Setup –
Configures the inverter/charg e r . O p t i o n s i n c l u d e :
•
Search
Used to set the search watts at which the inverter will come out of “sleep”
mode. Selections are 3-75 watts.
• LBCO (Low Battery Cut Out)
Used to set the DC voltage level to shut down the inverter and protect the
batteries from over-discharge damage. Selections are 9.0 VDC, 10.0
V D C a n d 1 1 . 0 V D C . D C v o l t s must reach and maintain LBCO
setting for 1 minute before i n v e r t e r s h u t d o w n i s i n i t i a t e d .
•
Battery Size
Used to select the approximate battery bank capacity. Selections are in 200
amp increments from 200 -1000 amps. Battery capacity is also used to
determine absorption time during battery charging. See Chart 2.
•
Battery Charge Rate
Used to set the maximum charge rate during bulk, absorp tion or float
charge. Selections are in 10 amp increments from 10% - 100%.
•
B a t t e r y T y p e
Used to select battery type for the battery charge profile. S e l e c t i o n s a r e
G e l , A G M ( A b s o r b e d G l a s s M a t ) , L i q u i d L e a d Acid (Flooded) and
Custom (future). See Chart 1.
•
C o n t r a s t
U s e d t o a d j u s t t h e L C D c o n t r a s t .
•
AC Dropout Voltage
Used to select the AC voltage threshold (60, 90, 100 VAC) where the
i n v e r t e r t r a n s f e r s f r o m A C l i n e t o i n v e r t e r m o d e .
•
T e c h – ( d i s p l a y o n l y )
R e s e r v e d f o r f u t u r e , t h i s f e a t u r e i s u s e d f o r t r o u b l e s h o o t i n g t h e
inverter/charger. Options in c l u d e F E T t e m p , t r a n s f o r m e r temp, and
battery temp.
Factory Reset
Restores all settings to factory defaults. press and hold the switch the switch
for 5 seconds. “Reset Complete” will be appear in the display. See Chart 3.
Ó 2003 - Magnum Energy, Inc. 7