©2007 Magnum Energy Inc.
15
Operation
Min DC
- This menu displays the lowest battery voltage since the last
reset. The voltage shown on the display is averaged each second and is
helpful when troubleshooting or detecting an over-discharge condition.
To reset the Min DC display, press and hold the rotary “SELECT” knob for 5
seconds while the ‘Min DC’ display is shown. After this value has been reset,
the display will begin monitoring and displaying new ‘minimum’ DC input
values. If the Battery Monitor is not connected or not communicating, the
display will show “0.0”.
•
Status…
06 BM: TECH
display
show s :
Status…
Max DC: **
rotate to
Status…
Max DC:
**
M aximu m D C
values are reset
and display now
show s new values :
press to
select
press and hold
for ~ 5 seconds
Figure 5-6, Resetting the Max DC Value
Status…
06 BM: TECH
display
show s :
Status…
Min DC: **
rotate to
Status…
Min DC:
**
M in imu m D C
values are reset
and display now
show s new values :
press to
select
press and hold
for ~ 5 seconds
Figure 5-5, Resetting the Min DC Value
Max DC
- This menu displays the highest battery voltage since the last
reset. The voltage shown on the display is averaged each second, this allows
you to check your charging system (battery charger, charge controller, etc.)
to ensure the charging voltage has been attained. This display is also helpful
when troubleshooting or detecting if an over-charge condition has occurred.
To reset the Max DC display, press and hold the rotary “SELECT” knob for 5
seconds while the ‘Max DC’ display is shown. After this value has been reset,
the display will begin monitoring and displaying new ‘maximum’ DC input
values. If the Battery Monitor is not connected or not communicating, the
display will show “0.0”.
•
http://www.wholesalesolar.com/inverters.html
