Magnum Energy MagnaSine MS2012 Скачать руководство пользователя

Страница: 8 / 64

2009 Magnum Energy Inc

Page 2

Introduction

1.1 Features and Benefi ts

The MS Series inverter/charger is designed to allow easy access to wiring, circuit breakers, controls

and for viewing the LED (Light Emitting Diode) status indicator. Its die cast base plate with one

piece aluminum cover ensures maximum durability with minimum weight, as well as cooler more

cient operation.

The front of the MS Series is equipped with the following features (see

gures 1-1 and 1-2):

(1) Power Switch

- a momentary push-button switch that alternately turns the inverter

ON or OFF.

(2) Status LED Indicator

- this green LED illuminates to provide information on the

inverter or charger operation.

(3) Stack Connection Port (red label)

- a RJ11 port that allows series-stacking and

accepts the optional RSAs (Remote Switch Adapters) which allows remote on/off switch

operation.

Info:

The series-stacking capability, which allows two units to provide 120/240 VAC

output is only available on the MS4024 Series Inverter/Charger.

(4) Magnum Net Connection Port (green label)

- a RJ11 port that accepts optional

Network capable accessories (i.e., Auto Gen Start or Battery Monitor).

(5) Remote Connection Port (blue label)

- a RJ11 port that allows the optional remote

control display to be connected.

(6) BTS Connection Port (yellow label)

- a RJ11 port that accepts the remote Battery

Temperature Sensor (BTS) accessory.

(7) Mounting Flange

- used to secure the inverter to a shelf or wall.

(8) AC Entry/Exit Connections

- two 3/4” knockouts provided with cable-clamp

strain

relief

s to allow and hold the AC input and output

eld

wiring.

(9) Intake Air Vents -

ventilation openings to pull in air to help keep the inverter cool

for peak performance.

(10) Positive DC Terminal

- provides 360 degree connection point for the positive (+)

cable from the battery bank; provided with a 5/16-18 stainless Kep nut

on a 5/16-18 bolt

to hold the battery cable to the DC terminal which uses.

(11) Negative DC Terminal

- provides 360 degree connection point for the negative (-)

cable from the battery bank; provided with a 5/16-18 stainless Kep nut

on a 5/16-18 bolt

to hold the battery cable to the DC terminal.

(12) DC Equipment Ground Terminal

- this connection is used to tie the exposed

chassis of the inverter to the DC grounding system. This terminal accepts one CU/AL

conductor from #14 to # 2 AWG (21. to 33.6 mm

)

Note 1 - Hex nut with external tooth lock washer

•

Содержание MagnaSine MS2012

































































Результаты поиска

Содержание MagnaSine MS2012

Отзывы:

Похожие инструкции для MagnaSine MS2012

Бренды по названию

Популярные бренды

Magnum Energy MagnaSine MS2012, Руководство пользователя

Результаты поиска

Содержание MagnaSine MS2012

Отзывы:

Похожие инструкции для MagnaSine MS2012

Бренды по названию

Популярные бренды