Magnum Dimensions ME-BMK Скачать руководство пользователя страница 21

Страница: 21 / 21

Warranty and Service Info

6.1

How to Receive Repair Service

If your product requires warranty service or repair, contact:
• Sensata Technologies (Magnum Energy-branded products) at:

Telephone: 425-353-8833
Fax: 425-353-8390
Email: [email protected]

If returning your product directly to Sensata for repair, you must:
1. Return the unit in the original, or equivalent, shipping container.
2. Receive a Return Materials Authorization (RMA) number from

the factory prior to the return of the product to Sensata.

3. Place the RMA numbers clearly on the shipping container or on

the packing slip.

When sending your product for service, please ensure it is properly

packaged.

Damage due to inadequate packaging is not covered

under warranty.

We recommend sending the product by traceable

or insured service.

Содержание ME-BMK






















Результаты поиска

Содержание ME-BMK

Отзывы:

Похожие инструкции для ME-BMK

Бренды по названию

Популярные бренды

Magnum Dimensions ME-BMK, Руководство пользователя

Результаты поиска

Содержание ME-BMK

Отзывы:

Похожие инструкции для ME-BMK

Бренды по названию

Популярные бренды